MAKER-PUBLISHED DATA
xTool source tables
These 4 xTool sources supply the 528 rows in the settings library. We copied and cited the values; we did not test them. Open a source to check its conditions and notes before using a setting.
xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF) ↗
xTool says these are reference values from its own tests; test your own sheet first.
DATE READ /xTool: Processing Parameter Settings Recommended for Common Materials (F1) ↗
Updated by xTool on 2023-08-03. Based on xTool laboratory tests.
DATE READ /xTool: Recommended Material Processing Parameters for Laserbox ↗
Updated by xTool on 2023-09-19. Laboratory conditions, for reference only.
DATE READ /xTool S1 product page: maximum one-pass cutting speed and thickness ↗
Maximum one-pass figures published by xTool on its product page; power is not stated there.
DATE READ /
A blank is not a zero
“—” means the source did not publish that value. No missing power, speed, pass count, thickness, or line density is calculated or filled in.
Speed conversions are arithmetic: mm/min = mm/s × 60; in/min = mm/s × 60 ÷ 25.4. The settings library keeps the original row string alongside the converted display.
The S1 source gives maximum one-pass cutting figures. It does not state power. Those rows are labeled by their source and must not be read as complete cut recipes.
Spot an error? Send the source and row to [email protected].