Published xTool settings. Not tested by Kerfbook.

THE SETTINGS LIBRARY / 528 PUBLISHED ROWS

xTool settings library.

528 published rows across 9 machine/module combinations. Filter by machine, material, thickness, and operation.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

Filter by machine and material
FILTER PUBLISHED SETTINGS
01 / Machine
Diode (blue)
Infrared (1064 nm)
CO2

528 published settings · showing 30

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Acrylic
3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave80%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 80% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave80%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 80% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmCut100%1mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 1 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmBitmap engrave100%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmFill engrave100%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s2—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 3 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave100%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave100%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.