Published xTool settings. Not tested by Kerfbook.

MATERIAL INDEX / 3 PUBLISHED ROWS

Leather
published settings.

3 published rows. Published settings for the leather product named by xTool. Identify your material and its coating before using a laser; these rows do not establish that another leather product is safe.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

3 rows match material names containing “leather”.Filter the full library ↗

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Metal
Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Score90%500mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 90%-500mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Vector engrave70%500mm/s1120xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: 120

Original: 70%-500mm/s-120 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Cut90%10mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 90%-10mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

— = not published by the source. Similar-sounding materials are not silently included. Read the source notes.