Published xTool settings. Not tested by Kerfbook.

MATERIAL INDEX / 5 PUBLISHED ROWS

Slate and stone
published settings.

5 published rows. The source names a Rock Coaster. These are those published rows, not a tested recipe for every slate or stone surface.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

5 rows match material names containing “slate, stone, or rock coaster”.Filter the full library ↗

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Stone
Rock CoasterxTool F1 (10W diode)Stone—Score100%200mm/s1—xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: —

Original: 100%-200mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Rock CoasterxTool F1 (10W diode)Stone—Vector engrave100%500mm/s190xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: 90

Original: 100%-500mm/s 90 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Rock CoasterxTool F1 (2W infrared)Stone—Score100%50mm/s1—xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: —

Original: 100%-50mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Rock CoasterxTool F1 (2W infrared)Stone—Vector engrave100%100mm/s1240xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: 240

Original: 100%-100mm/s-240 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Rock CoasterxTool F1 (2W infrared)Stone—Bitmap engrave90%—mm/s1—xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: —

Original: 90%-150μs-450DPI-Jarvis-Invert-1

Extra: Dot duration 150 μs, 450 DPI, Jarvis Invert

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

— = not published by the source. Similar-sounding materials are not silently included. Read the source notes.