Published xTool settings. Not tested by Kerfbook.

MATERIAL INDEX / 46 PUBLISHED ROWS

Basswood plywood
published settings.

46 published rows. Published basswood and basswood plywood settings. Match the exact sheet thickness and machine; solid basswood and plywood are not interchangeable.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

46 rows match material names containing “basswood”.Filter the full library ↗

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Wood
12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 20WWood3.175 mmCut100%5mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 31: 100% / 5 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 20WWood3.175 mmBitmap engrave60%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 31: 60% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 20WWood3.175 mmFill engrave60%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 31: 60% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 20WWood3.175 mmVector engrave80%60mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 31: 80% / 60 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 10WWood3.175 mmCut100%4mm/s2—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 32: 100% / 4 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 10WWood3.175 mmBitmap engrave60%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 32: 60% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 10WWood3.175 mmFill engrave50%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 32: 50% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

12" x 12"x 1/8" Basswood PlywoodxTool D1 Pro 10WWood3.175 mmVector engrave50%30mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3.175 mm

Lines/cm: —

Original: Row 32: 50% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 20WWood3 mmCut100%6mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 53: 100% / 6 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 20WWood3 mmBitmap engrave40%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 53: 40% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 20WWood3 mmFill engrave40%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 53: 40% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 20WWood3 mmVector engrave80%60mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 53: 80% / 60 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 10WWood3 mmCut100%3mm/s2—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 54: 100% / 3 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 10WWood3 mmBitmap engrave80%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 54: 80% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 10WWood3 mmFill engrave70%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 54: 70% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 10WWood3 mmVector engrave50%30mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 54: 50% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 5WWood3 mmCut100%2mm/s2—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 55: 100% / 2 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Basswood plywood 30*30 6pcsxTool D1 Pro 5WWood3 mmBitmap engrave100%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: Row 55: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 20WWood6 mmCut100%6mm/s3—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 64: 100% / 6 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 20WWood6 mmBitmap engrave60%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 64: 60% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 20WWood6 mmFill engrave60%100mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 64: 60% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 20WWood6 mmVector engrave80%60mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 64: 80% / 60 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 10WWood6 mmCut100%2mm/s4—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 65: 100% / 2 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 10WWood6 mmBitmap engrave60%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 65: 60% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 10WWood6 mmFill engrave50%50mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 65: 50% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

6mm Basswood plywood 30*30 4pcsxTool D1 Pro 10WWood6 mmVector engrave50%30mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 6 mm

Lines/cm: —

Original: Row 65: 50% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm BasswoodxTool F1 (10W diode)Wood3 mmScore70%80mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 70%-80mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmVector engrave100%300mm/s1100xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: 100

Original: 100%-300mm/s 100 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmBitmap engrave80%—mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 80%-420μs-270DPI-Jarvis-1

Extra: Dot duration 420 μs, 270 DPI, Jarvis

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmCut90%3mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 90%-3mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

— = not published by the source. Similar-sounding materials are not silently included. Read the source notes.