Published xTool settings. Not tested by Kerfbook.

MATERIAL INDEX / 154 PUBLISHED ROWS

Acrylic
published settings.

154 published rows. Published settings for the acrylic colors and finishes named by xTool. A setting for black acrylic is not a setting for clear acrylic.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

154 rows match material names containing “acrylic”.Filter the full library ↗

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Acrylic
3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 81: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 82: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 83: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave80%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 80% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave80%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 80% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 84: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmCut100%1mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 1 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmBitmap engrave100%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Dark Red Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 5WAcrylic3 mmFill engrave100%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 85: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s3—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 100% / 3 mm/s / 3 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave80%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 80% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmVector engrave30%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 86: 30% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmCut100%3mm/s4—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 100% / 3 mm/s / 4 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmBitmap engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmFill engrave40%50mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Chrome Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 10WAcrylic3 mmVector engrave40%40mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 87: 40% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmCut100%3mm/s2—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 3 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmBitmap engrave100%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

3mm Yellow Acrylic Sheet(Opaque,Glossy)xTool D1 Pro 20WAcrylic3 mmFill engrave100%100mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: Row 88: 100% / 100 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

— = not published by the source. Similar-sounding materials are not silently included. Read the source notes.