Published xTool settings. Not tested by Kerfbook.

MATERIAL INDEX / 20 PUBLISHED ROWS

Stainless steel
published settings.

20 published rows. Published engraving settings for stainless steel and the named stainless steel products. Coatings and surface finishes matter; keep the source material name with the setting.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

20 rows match material names containing “stainless steel”.Filter the full library ↗

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Metal
Silver Stainless Steel Tag 10pcsxTool D1 Pro 20WMetal—Bitmap engrave100%30mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 4: 100% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Silver Stainless Steel Tag 10pcsxTool D1 Pro 20WMetal—Vector engrave100%15mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 4: 100% / 15 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Silver Stainless Steel Tag 10pcsxTool D1 Pro 10WMetal—Bitmap engrave100%20mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 5: 100% / 20 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Silver Stainless Steel Tag 10pcsxTool D1 Pro 10WMetal—Vector engrave100%40mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 5: 100% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Silver Stainless Steel Tag 10pcsxTool D1 Pro 5WMetal—Bitmap engrave100%3mm/s2—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 6: 100% / 3 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Necklace (2pcs)xTool D1 Pro 20WMetal—Bitmap engrave100%30mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 7: 100% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Necklace (2pcs)xTool D1 Pro 20WMetal—Vector engrave100%20mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 7: 100% / 20 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Necklace (2pcs)xTool D1 Pro 10WMetal—Bitmap engrave100%20mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 8: 100% / 20 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Necklace (2pcs)xTool D1 Pro 10WMetal—Vector engrave100%10mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 8: 100% / 10 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(Black 2pcs)20ozxTool D1 Pro 20WMetal—Bitmap engrave100%75mm/s2—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 15: 100% / 75 mm/s / 2 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(Black 2pcs)20ozxTool D1 Pro 20WMetal—Vector engrave100%60mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 15: 100% / 60 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(Black 2pcs)20ozxTool D1 Pro 10WMetal—Bitmap engrave100%40mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 16: 100% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(Black 2pcs)20ozxTool D1 Pro 10WMetal—Vector engrave100%20mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 16: 100% / 20 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(StainlessSteel 2pcs)20ozxTool D1 Pro 20WMetal—Bitmap engrave100%40mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 19: 100% / 40 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(StainlessSteel 2pcs)20ozxTool D1 Pro 20WMetal—Vector engrave100%50mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 19: 100% / 50 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(StainlessSteel 2pcs)20ozxTool D1 Pro 10WMetal—Bitmap engrave100%30mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 20: 100% / 30 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless Steel Mug(StainlessSteel 2pcs)20ozxTool D1 Pro 10WMetal—Vector engrave100%20mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: Row 20: 100% / 20 mm/s / 1 pass(es)

Extra: —

xTool: D1 Pro Engraving & Cutting Parameters for Reference (PDF)

xTool says these are reference values from its own tests; test your own sheet first.

Stainless SteelxTool F1 (2W infrared)Metal—Score80%25mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 80%-25mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Stainless SteelxTool F1 (2W infrared)Metal—Vector engrave50%550mm/s1200xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: 200

Original: 50%-550mm/s-200line per cm -1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Stainless SteelxTool F1 (2W infrared)Metal—Bitmap engrave60%—mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 60%-150μs-450DPI-Jarvis-Invert-1

Extra: Dot duration 150 μs, 450 DPI, Jarvis Invert

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

— = not published by the source. Similar-sounding materials are not silently included. Read the source notes.