Published xTool settings. Not tested by Kerfbook.

DIODE (BLUE) / 10W

xTool F1 (10W diode)
published settings.

19 published starting points for the xTool F1 (10W diode), grouped by material category below. Keep the laser module and wattage matched to the source; another xTool module is not the same machine.

These are the maker's published starting points. We did not test them. Run a test card on your own sheet.

PUBLISHED SOURCE
xTool: Processing Parameter Settings Recommended for Common Materials (F1) ↗

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Filter this machine

mm/min = mm/s × 60 · in/min = mm/s × 60 ÷ 25.4. Display rounded to 3 decimal places; source values stay unchanged.

Maker-published laser settings. A dash means the source did not publish a value.
Material / machineThicknessOperationPowerSpeed mm/sPassesLines/cmSource / raw
Acrylic
3mm Black AcrylicxTool F1 (10W diode)Acrylic3 mmCut100%2mm/s1—xTool source
Raw + notes

Category: Acrylic

Thickness: 3 mm

Lines/cm: —

Original: 100%-2mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Metal
Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Score90%500mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 90%-500mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Vector engrave70%500mm/s1120xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: 120

Original: 70%-500mm/s-120 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Silver-Black Leather for EngravingxTool F1 (10W diode)Metal—Cut90%10mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 90%-10mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Black Metal Name CardxTool F1 (10W diode)Metal—Score100%400mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 100%-400mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Black Metal Name CardxTool F1 (10W diode)Metal—Vector engrave100%400mm/s1160xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: 160

Original: 100%-400mm/s 160 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Black Alumina SheetxTool F1 (10W diode)Metal—Score90%1,100mm/s1—xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: —

Original: 90%-1100mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Black Alumina SheetxTool F1 (10W diode)Metal—Vector engrave90%1,100mm/s1300xTool source
Raw + notes

Category: Metal

Thickness: —

Lines/cm: 300

Original: 90%-1100mm/s 300 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Paper & card
Art Scratch PaperxTool F1 (10W diode)Paper & card—Score100%1,200mm/s1—xTool source
Raw + notes

Category: Paper & card

Thickness: —

Lines/cm: —

Original: 100%-1200mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Art Scratch PaperxTool F1 (10W diode)Paper & card—Vector engrave90%2,400mm/s1220xTool source
Raw + notes

Category: Paper & card

Thickness: —

Lines/cm: 220

Original: 90%-2400mm/s-220 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3.5mm Corrugated PaperxTool F1 (10W diode)Paper & card3.5 mmScore70%110mm/s1—xTool source
Raw + notes

Category: Paper & card

Thickness: 3.5 mm

Lines/cm: —

Original: 70%-110mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3.5mm Corrugated PaperxTool F1 (10W diode)Paper & card3.5 mmVector engrave50%300mm/s1100xTool source
Raw + notes

Category: Paper & card

Thickness: 3.5 mm

Lines/cm: 100

Original: 50%-300mm/s-100 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3.5mm Corrugated PaperxTool F1 (10W diode)Paper & card3.5 mmBitmap engrave40%—mm/s1—xTool source
Raw + notes

Category: Paper & card

Thickness: 3.5 mm

Lines/cm: —

Original: 40%-300μs-300DPI-Jarvis-1

Extra: Dot duration 300 μs, 300 DPI, Jarvis

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Stone
Rock CoasterxTool F1 (10W diode)Stone—Score100%200mm/s1—xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: —

Original: 100%-200mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Rock CoasterxTool F1 (10W diode)Stone—Vector engrave100%500mm/s190xTool source
Raw + notes

Category: Stone

Thickness: —

Lines/cm: 90

Original: 100%-500mm/s 90 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

Wood
3mm BasswoodxTool F1 (10W diode)Wood3 mmScore70%80mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 70%-80mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmVector engrave100%300mm/s1100xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: 100

Original: 100%-300mm/s 100 lines per cm-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmBitmap engrave80%—mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 80%-420μs-270DPI-Jarvis-1

Extra: Dot duration 420 μs, 270 DPI, Jarvis

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

3mm BasswoodxTool F1 (10W diode)Wood3 mmCut90%3mm/s1—xTool source
Raw + notes

Category: Wood

Thickness: 3 mm

Lines/cm: —

Original: 90%-3mm/s-1

Extra: —

xTool: Processing Parameter Settings Recommended for Common Materials (F1)

Updated by xTool on 2023-08-03. Based on xTool laboratory tests.

— = not published by the source. Open “Raw + notes” on a row to see its original text and any extra parameters. How we handle source data.